基于能量运算的磁共振信号尖峰噪声抑制方法   总被引：5，自引：4，他引：1       下载免费PDF全文

万玲  张扬  林君  蒋川东  林婷婷 《地球物理学报》2016,59(6):2290-2301

磁共振探测信号微弱,使用高灵敏度的核磁共振地下水探测仪,极易受到环境噪声干扰.其中,工频谐波噪声和尖峰噪声,是影响信号质量最严重的两类噪声.国内外研究表明,通过参考线圈的布设,依据探测线圈和参考线圈中噪声相关性,利用自适应参考对消算法,能够有效抑制工频谐波噪声.然而,尖峰噪声的存在严重影响了主通道与参考道的数据相关性,成为了参考对消算法应用的难题与障碍.为解决这一问题,本文提出磁共振信号中尖峰噪声的抑制方法,推导了能量域磁共振信号表达式,通过计算信号能量,可有效检测尖峰噪声并突出不易识别的小幅度尖峰噪声,采用基于中位数的绝对偏差法确定阈值,进而剔除尖峰噪声.为了验证去噪效果,与应用较广的统计叠加法进行对比研究.仿真结果表明,对于干扰幅度较大、持续时间较长的尖峰噪声,能量运算法和统计叠加法均能识别并剔除,且不损失有效的磁共振信号,标准差偏差控制在0.3%以内,可以满足实际应用的要求;对于小于信号幅度1.5倍的尖峰噪声,能量运算法可有效识别并剔除,而统计叠加法无法实现.针对多通道探测系统,使用能量运算法剔除尖峰噪声后,可明显提高主通道和参考道的数据相关性,为后续自适应参考对消算法的应用奠定了基础.实测数据处理结果进一步证明了本文方法的实用性.  相似文献   

2015年尼泊尔M_S8.1地震震源区S波三维速度结构与强震发生机理研究          下载免费PDF全文

吕子强  雷建设 《地球物理学报》2016,59(12):4529-4543

利用2001-2003年期间在2015年4月12日尼泊尔M_S8.1级强震震源区流动地震观测记录到的连续波形数据,提取了5~25 s周期的瑞利波相速度频散曲线,并构建了尼泊尔地震震源区二维瑞利波相速度分布图像.以0.5°×0.5°为网格大小将研究区网格化,采用NA算法反演得到尼泊尔地震震源地区三维S波速度结构.结果显示,在上地壳,以主前锋逆冲断裂带（MFT）为界,其以北地区为高波速异常,而其以南为明显低波速异常;在中地壳,以藏南拆离系（STDS）为界,南北两侧速度结构也存在明显差别,以南地区为明显高波速异常,而以北地区为明显低波速异常.这些结构特征说明,印度板块与欧亚板块碰撞挤压作用形成地幔热物质上涌并造成地壳物质部分熔融,并由此形成了东西向拉张的南北向裂谷.2015年尼泊尔M_S8.1级主震和最大余震均发生于高低波速异常过渡区且偏向高波速异常区,暗示了这样的波速异常区易于积累能量孕育强震.主震和最大余震的南侧均存在明显的低波速异常,与主喜马拉雅滑脱断裂带（MHT）相对应,可能代表部分熔融或深部流体作用于主边界断裂带（MBT）附近的MHT断裂带,降低断层面上的有效正应力,从而触发尼泊尔强震及最大余震的发生.主震与最大余震之间的余震分布于高低波速异常变化较为明显的地区,说明研究区内地震的发生受震源区附近的速度结构控制.  相似文献   

The utilization of the double focal transformation for sparse data representation and data reconstruction          下载免费PDF全文

H. Kutscha  D.J. Verschuur 《Geophysical Prospecting》2016,64(6):1498-1515

In many cases, seismic measurements are coarsely sampled in at least one dimension. This leads to aliasing artefacts and therefore to problems in the subsequent processing steps. To avoid this, seismic data reconstruction can be applied in advance. The success and reliability of reconstruction methods are dependent on the assumptions they make on the data. In many cases, wavefields are assumed to (locally) have a linear space–time behaviour. However, field data are usually complex, with strongly curved events. Therefore, in this paper, we propose the double focal transformation as an efficient way for complex data reconstruction. Hereby, wavefield propagation is formulated as a transformation, where one‐way propagation operators are used as its basis functions. These wavefield operators can be based on a macro velocity model, which allows our method to use prior information in order to make the data decomposition more effective. The basic principle of the double focal transformation is to focus seismic energy along source and receiver coordinates simultaneously. The seismic data are represented by a number of localized events in the focal domain, whereas aliasing noise spreads out. By imposing a sparse solution in the focal domain, aliasing noise is suppressed, and data reconstruction beyond aliasing is achieved. To facilitate the process, only a few effective depth levels need to be included, preferably along the major boundaries in the data, from which the propagation operators can be calculated. Results on 2D and 3D synthetic data illustrate the method's virtues. Furthermore, seismic data reconstruction on a 2D field dataset with gaps and aliased source spacing demonstrates the strength of the double focal transformation, particularly for near‐offset reflections with strong curvature and for diffractions.  相似文献   

Effects of sediment properties on surface-generated ambient noise in a shallow ocean     

Jin-Yuan Liu  I-Chun Lin 《Ocean Engineering》2005,32(16):1887-1905

Surface-generalized ambient noise in a shallow ocean waveguide with a sediment layer possessing a specific class of density and sound speed distributions capable of describing a realistic seabed environment is considered in this analysis. This class of non-uniform sediment layer has the density and sound speed distributions varying with respect to depth as a generalized-exponential and an inverse-square function, respectively. The study invokes a formulation developed by Kuperman and Ingenito (Kuperman, W. A., Ingenito, F., 1980. Spatial correlation of surface-generated noise in a stratified ocean. J. Acoust. Soc. Am., 67, 1988-1996.) for surface noise generation, in conjunction with the analytical solutions for the Helmholtz equation corresponding to the sediment layer, to arrive at an analytical expression convenient for numerical implementation. The intensity and spatial correlation of the noise sound field are analyzed with respect to the variation of the system parameters, including frequency, sediment layer thickness, sound speed gradient, with emphasis on the effects of sediment properties on the ambient noise field. The results have demonstrated that the intensity of the noise field is relatively sensitive to the variation of the parameters, but the spatial correlation is affected to a less extent, suggesting that the energy distribution, rather than the spatial structure, of the noise field is more susceptible to the environmental variations.  相似文献   

噪声信号源超磁致伸缩换能器设计方法研究     

任绍俊  程宜杰 《海洋技术学报》2007,26(1):61-64,68

针对以往噪声信号发射换能器在实际工作中,存在着诸多影响正常科研试验的问题,并根据噪声信号的技术要求,以及探测方式的技术特征,我们对噪声发射换能器进行了重新设计,从选用超磁致伸缩材料作为换能器的材料入手,结合国内外一些新的设计理念,从材料性能分析,到理论设计,最后到可靠性实施方法,都进行了周密细致的研究,并完成了设计全过程。测试结果和使用性能表明,达到了预期的目的,这也是该材料在国内首次应用于单只宽频水声换能器中,开创了稀土超磁致伸缩材料应用的又一个先列。  相似文献   

原子钟噪声的蒙特卡络模拟方法   总被引：1，自引：0，他引：1  

孙宏伟 《时间频率学报》1996,19(1):33-37

讨论了原子钟噪声的蒙特卡络模拟方法．具体过程是：先产生模拟所需的正态分布随机数，从实际钟的阿仑方差估算出噪声电平，然后用１组递点函数产生高质量的模拟钟时差的随机序列．在对１台商品铯钟进行具体模拟后，给出了真实数据与模拟值的阿仑方差之问的相符程度，最后对实际问题进行了分析．  相似文献   

S-wave velocity images of the Dead Sea Basin provided by ambient seismic noise     

《Journal of Asian Earth Sciences》2013

Based on passive seismic interferometry applied to ambient seismic noise recordings between station pairs belonging to a small-scale array, we have obtained shear wave velocity images of the uppermost materials that make up the Dead Sea Basin. We extracted empirical Green’s functions from cross-correlations of long-term recordings of continuous data, and measured inter-station Rayleigh wave group velocities from the daily correlation functions for positive and negative correlation time lags in the 0.1–0.5 Hz bandwidth. A tomographic inversion of the travel times estimated for each frequency is performed, allowing the laterally varying 3-D surface wave velocity structure below the array to be retrieved. Subsequently, the velocity-frequency curves are inverted to obtain S-wave velocity images of the study area as horizontal depth sections and longitude- and latitude-depth sections. The results, which are consistent with other previous ones, provide clear images of the local seismic velocity structure of the basin. Low shear velocities are dominant at shallow depths above 3.5 km, but even so a spit of land with a depth that does not exceed 4 km is identified as a salt diapir separating the low velocities associated with sedimentary infill on both sides of the Lisan Peninsula. The lack of low speeds at the sampling depth of 11.5 km implies that there are no sediments and therefore that the basement is near 10–11 km depth, but gradually decreasing from south to north. The results also highlight the bowl-shaped basin with poorly consolidated sedimentary materials accumulated in the central part of the basin. The structure of the western margin of the basin evidences a certain asymmetry both whether it is compared to the eastern margin and it is observed in north–south direction. Infill materials down to ∼8 km depth are observed in the hollow of the basin, unlike what happens in the north and south where they are spread beyond the western Dead Sea shore.  相似文献   

Fault detection by reflected surface waves based on ambient noise interferometry     

《地震研究进展（英文）》2021,1(4):100035

Detecting subsurface fault structure is important for evaluating potential earthquake risks associated with active faults. In this study, we propose a new method to detect faults using reflected surface waves observed in ambient noise cross correlation functions. Ambient noise tomography using direct surface waves obtained from ambient noise interferometry has been widely used to characterize active fault zones. In cases where a strong velocity contrast exists across the fault interface, fault-reflected surface waves are expected. We test this idea using a linear array deployed in the Suqian segment of Tanlu fault zone in Eastern China. The fault-reflected surface waves can be clearly seen in the cross-correlation functions of the ambient noise data, and the spatial position of the fault on the surface is close to the stations where the reflected signals first appear. Potentially reflected surface waves could also be used to infer the dip angle, fault zone thickness and the degree of velocity contrast across the fault by comparing synthetic and observed waveforms.  相似文献   

红外焦平面探测器信息获取与预处理电路设计     

范文龙  董峰  傅雨田 《遥感学报》2014,18(Z1):30-34

针对中国科学院上海技术物理研究所研制的1500元红外线列焦平面探测器的输出特性,提出了以低噪声运放为核心的信息获取电路和以FPGA(Field Programmable Gate Array)为核心的数据预处理的设计方案,实现了驱动电路和探测器的良好匹配,较好地发挥了探测器高灵敏度的特性.测试结果表明,该方案不仅对系统获得优于50 mK噪声等效温差的高灵敏度成像起到了重要作用,足够宽的量化设计还保证了系统的动态范围和图像的丰富层次.该设计方案已成功应用在一些其他类型的红外焦平面探测器中.  相似文献   

乌鲁木齐区域数字遥测台网各子台背景噪声分析   总被引：6，自引：3，他引：6  

刘永廷  夏爱国  赵庆 《内陆地震》2002,16(4):366-371

选取乌鲁木齐区域数字遥测台网中 1 1个子台的背景噪声数字记录 ,计算并分析其背景噪声地动速度均方根值 RMS、有效测量动态范围以及噪声功率谱 ,最后确定出各台址背景噪声相对集中的频段  相似文献